Skip to content
Tiremaxx Service Centers
4.80-8 trailer tires at Tiremaxx in St. Joseph, MN

Specialty Trailer Tires

4.80-8 Trailer Tires

What 4.80-8 means, what else fits the same wheel, and how to get the right load range, from the Tiremaxx tire crew in St. Joseph, MN.

Wheel
8"
Construction
Bias-ply
Section width
4.8"
Overall dia.
—

What 4.80-8 means

Every number on the sidewall is telling you something. Here's this one, decoded:

  • 4.80Section widthAbout 4.8 inches across the widest part of the tire.
  • –ConstructionBias-ply. The plies run diagonally, which gives a stiff, tough sidewall.
  • 8Wheel diameterFits a 8-inch wheel. This is the number that has to match your rim exactly.

Size is only half the answer

Two 4.80-8 tires can be rated for very different weights. Load range (B, C, D, E and up) sets how much each tire can carry at its rated pressure, and on a trailer that number matters as much as the size does. Your trailer's certification label, usually on the front left of the frame, lists the size and load range it was built for. Bring us that label, your paperwork or the old tire and we'll match the load range to what you actually tow.

Crosses categories

We also carry 4.80-8 as lawn & garden tires. Same numbers, different build. Tell us what it's going on and we'll steer you to the right one.

Commonly used on: small utility trailers, boat trailers, dollies and carts.

Other sizes on an 8" wheel

These share your rim diameter. Whether one of them will actually work depends on rim width, load range and fender clearance. Ask us before you switch.

4.80-8 questions, answered

4.80: About 4.8 inches across the widest part of the tire. –: Bias-ply. The plies run diagonally, which gives a stiff, tough sidewall. 8: Fits a 8-inch wheel. This is the number that has to match your rim exactly.

Specialty Trailer (ST) tires are built with stiffer sidewalls for towing loads and are rated differently than passenger tires, so they aren't interchangeable just because the numbers look similar. Your trailer's certification label lists the size and load range it was built for. Matching it is what keeps the load capacity you're supposed to have. Bring us the label or the old tire and we'll match it.

It's made as both. 4.80-8 is a size, not a build. The same numbers are produced in constructions aimed at different jobs, with different load ranges and tread designs. We carry it on the specialty trailer side and the lawn mower & garden side, so tell us what it's going on and we'll point you at the right one. Call (320) 363-7246 if you're not sure which you need.

We carry 5.70-8, 16.5x6.50-8, 18.5x8.50-8 in the same 8-inch wheel diameter. Sharing a rim diameter doesn't guarantee a swap will work, though. Rim width, load range and clearance all have to line up. Call (320) 363-7246 and we'll tell you straight whether a change makes sense.

Stock moves, so the honest answer is to check. Send us the size through the availability request on this page or call (320) 363-7246. We'll tell you what we have on the shelf, what load ranges are available and how fast we can get anything we'd need to order.

← All specialty trailer tire sizes

Pull up to the counter

Need 4.80-8 on the trailer?

Tell us the size and load range and we'll prepare a no-pressure quote.

Schedule ServiceCall (320) 363-7246