Skip to content
Tiremaxx Service Centers
Close-up of a compact loader's rubber track and undercarriage

Equipment

Equipment Tracks

We stock a large inventory of rubber tracks for mini excavators, skid steers, compact track loaders and multi-terrain loaders, matched to your machine.

Find the track that fits your machine

Start with the make of your skid steer, mini excavator or compact track loader, and we'll show the tracks that fit it.

Or pick your track size

If you can read the numbers off the old track, go straight to the size.

Rubber tracks we stock

Maxam and TrackBoss rubber tracks

We stock a large inventory of rubber tracks for compact track loaders and mini excavators from Maxam and TrackBoss, plus C-Lug, Multi-Bar and Zig-Zag tracks. Find your size above, then tell us which tread suits the ground you work on and we'll quote it for your machine.

  • Maxam logo
  • TrackBoss logo
  • Maxam MT130 rubber track with an H-lug tread pattern

    Compact track loaders

    Maxam MT130 H-Lug

    A versatile H-lug tread with a stepped pattern for clean-out, balancing traction against cut and wear resistance. Offered in narrow and wide widths.

  • Maxam MT150 rubber track with a Z-lug tread pattern

    Compact track loaders

    Maxam MT150 Z-Lug

    A self-cleaning, stepped Z-lug tread built for wet ground, on a heavy-duty carcass. Offered in narrow and wide widths.

  • Maxam MT170 rubber track for mini excavators

    Mini excavators

    Maxam MT170 Mini-Ex

    A general-purpose mini-excavator track with a tread that suits mixed surfaces, a cut- and tear-resistant compound and a heavy-duty carcass.

  • Rubber track with a C-lug (E3) tread pattern

    Compact track loaders

    C-Lug E3

    The C-lug pattern. Matches the E3 tread code listed for many compact track loaders in our fitment data.

  • Rubber track with a multi-bar (E5) tread pattern

    Compact track loaders

    Multi-Bar E5

    The multi-bar pattern. Matches the E5 tread code listed for many compact track loaders in our fitment data.

  • Rubber track with a zig-zag (Y6) tread pattern

    Compact track loaders

    Zig-Zag Y6

    The zig-zag pattern. Matches the Y6 tread code listed for many compact track loaders in our fitment data.

A rubber track is not a tire, and it is not a part you can eyeball. Width, pitch and link count all have to match, and the guiding and metal-piece style have to suit the undercarriage. Get one of the three wrong and the track will not stay on the machine.

So start with the machine itself. Pick your make and model below and we will show you the track sizes built for it, including the original equipment size where it differs from the replacement.

We stock a large inventory of rubber tracks. Tell us the machine and the size and we will confirm what we have on hand and what it costs.

Machines we track down tracks for

Compact track loader with rubber tracks and a lowered bucket on gravel
Compact track loaders
Mini excavator with rubber tracks and its bucket resting on gravel
Mini excavators
  • Mini and compact excavators
  • Skid steer loaders (including VTS-equipped machines)
  • Compact track loaders
  • Multi-terrain loaders
  • Carriers, dumpers and mini-transporters
  • Drilling rigs, lifts and specialty carriers
  • Fitment data covering 369 equipment makes
  • Standard-duty and heavy-duty constructions
  • Original equipment sizes cross-referenced
  • Serial-number ranges accounted for, where fitment differs

Common questions

Look for three numbers on the inside of the old track: width in millimetres, pitch in millimetres, and the number of links. A 400x72.5x72 track is 400 mm wide, 72.5 mm between lugs and has 72 links. If the track is too worn to read, the machine make and model is enough for us to look it up.

Plenty of machines were offered with more than one track width, and the same size is often available in more than one construction. That is why the finder shows every option for a model rather than picking one for you. The size on your machine now is the one to match.

Manufacturers change undercarriages mid-production, so the correct track can differ between two machines wearing the same model badge. Where that happens the fitment data lists each serial-number range separately. Check the plate on your machine if you are between two entries.

Yes. We stock a large inventory of rubber tracks. Call us with the machine and size and we will confirm availability and pricing for yours.

Pull up to the counter

Need a track for your machine?

Send us the make, model and size and we'll come back with availability and pricing.

Schedule ServiceCall (320) 363-7246